GT Sensor 29 Carbon Elite
Frame with LTS suspension technology, Sram SX 1x12 set, RockShox 35 gold fork, TRP G-Spec Trail S brakes.
Frame: Sensor Carbon 29 "Frame, 130mm Travel, BSA 73mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, 185x50mm Trunnion Shock Mount, ISCG05
Fork: RockShox 35 Gold RL, 140mm, 15x110mm Boost, 44mm offset
Muffler: RockShox Deluxe Select + RT, 185x50mm Trunnion, Debonair
Cranks: Truvativ Descendent 6K, Oak, 32T
Gear levers: SRAM SX Eagle, 12-speed
Cassette: SRAM PG-1230, 11-50T
Chain: SRAM SX Eagle, 12-speed
Derailleur: SRAM NX Eagle
Rims: WTB ST i29 TCS 2.0, 32h, Tubeless Ready
Brakes: TRP G-Spec Trail S Hydro Disc, 180 / 180mm Rotors
Stem: GT Alloy Stem, 31.8mm Clamp, 45mm Length
Handlebars: GT Alloy Riser Bar, 30mm Rise, 780mm Wide, 5 ° Rise, 8 ° Back
Tires: Maxxis Minion DHF, 29 x 2.5 ", EXOMaxxis Dissector, 29 x 2.4", EXO
Saddle: Fabric Scoop Shallow Sport, Steel Rails
Seatpost: GT Dropkick Dropper Post, 31.6, Internal Routing, 125mm (S, M), 1 50mm (L, XL)
Color: RAW
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM NX, SRAM SX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 118636 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews