GT Force 27.5 Comp, 2020 model
Fork: RockShox Lyrik Select RC, 160 mm, Charger Damper, BOOST 15x110 mm, tapered steerer, 46 mm offset
Shock absorber: RockShox Select+ RL, 185x55 mm, Metric Trunnion
Cranks: Prowheel, 30T, 170mm(SL), 175mm(XL)
Derailleur: SRAM NX
Shifting: SRAM NX, 11-speed
Cassette: Sunrace, 11-42, 11-speed
Chain: KMC X11, 11-speed
Brakes: Tektro M745 hydro disc, 203/180 mm rotors
Brake levers: Tektro M745
Hubs: Formula 15x110, Formula 12x148
Rims: WTB ST i29 TCS 2.0, 32h, tubeless ready
Tip: Stainless Steel, 14 g
Tires: Schwalbe Hans Dampf Performance, 27.5 x 2.35", TwinSkin, Addix Compound, tubeless ready / Schwalbe Hans Dampf Performance, 27.5 x 2.35", TwinSkin, Addix Compound, tubeless ready
Handlebars: GT Alloy riser bar, 15 mm rise, 780 mm width
Stem: GT Alloy Stem, 31.8 mm Clamp, 45 mm Length
Head composition: FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Saddle: WTB Silverado Sport, steel rails
Seat post: TranzX Dropper, 31.6, Internal Routing, 120 mm (S, M), 150 mm (L, XL)
Model year | 2020 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 99703 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews