GT FORCE 2.0 mountain bike model 2013
Fork- RockShox SECTOR RL SOLO AIR, stroke 150 mm, damping adjustment, fixed axle Maxl, conical column
Muffler- FOX RACING SHOX FLOAT CTD SV, Climb-Trail-Descent sensitivity adjustment, damping adjustment, lockout
Cranks- SHIMANO FC-M552, 42/32/24 teeth
Central composition - SHIMANO DEORE
Pedals- N / A
Derailleur - SHIMANO DEORE
Derailleur - SHIMANO SLX Shadow Plus
Gearing- SHIMANO SLX, 3x10
Cassette- SHIMANO CS-HG81-10, 10 speeds, 11-36 teeth
Chain- KMC X10
Rims - ALEX TD24, 32 holes
Tires- MAXXIS ARDENT, 26 "x2.25"
Hubs - GT ALL TERRA, front fixed axle 15x100mm
Tip- DT SWISS INDUSTRY
Brakes- FORMULA RX, discs 180mm
Brake levers- FORMULA RX
Handlebars - CRANKBROTHERS COBALT 1 RISER, width 720mm
Stem- EASTON EA50, inclination 8 °
Head assembly - FSA GRAVITY DL, 1.5 "EXTERNAL LOWER CUP, 1-1 / 8" ZEROSTACK UPPER CUP
Seat - WTB VOLT Comp
Seatpost - telescopic X-FUSION HILO R, control from the handlebars
Seat clamp - GT ALL TERRA GT ALLOY
Model year | 2013 |
Material | aluminium |
product ID | 5975 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews