Giant Trance Advanced Pro 29er 2, model 2019
Bike fitting discount 50 % (you will save 70 €)
Advanced Composite frame, all-carbon (including rear construction), Maestro suspension, stroke 115 mm
Fork FOX 34 Rhythm, stroke 130 mm, GRIP damping, Boost fixed axle 15 x 110 mm, OverDrive post
Shock absorber FOX Float DPS Performance, Trunnion Mount
Giant Contact SL handlebars, 780 x 35 mm, 20 mm increase
Giant Contact SL 35 stem
Seatpost Giant Contact Switch, telescopic, 30.9 mm
Saddle Giant Contact SL (Neutral)
SRAM NX Eagle gears, 1x12 gears
SRAM NX Eagle derailleur
SRAM Guide T brakes, 180 mm discs
Brake levers SRAM Guide T
SRAM NX Eagle cassette, 11-50 teeth
SRAM NX Eagle chain
Cranks Truvativ Descendant 6k Eagle Oak, converter 30 teeth
Central composition SRAM GXP Dub Press Fit
Giant TRX 1 29 WheelSystem rims, hookless carbon, 30 mm inner width
Hubs Giant TRX 1 29 WheelSystem, Boost fixed axis 15x110 mm and 12x148 mm
Giant TRX 1 29 WheelSystem wires
Tires front: Maxxis Minion DHF EXO TR, 29 x 2.3, 60 TPI / rear: Maxxis DHR II EXO TR, 29 x 2.3, 60 TPI, tubeless
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM NX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 79589 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews