Giant Reign 1.5 GE, model 2019
Bike fitting discount 50 % (you will save 70 €)
Metallic Orange / Black
AluxX SL Aluminum frame, Maestro suspension, stroke 160 mm
Fork FOX 36 Float Performance, stroke 170 mm, GRIP2 damping, compression setting (LSC), Boost fixed axle 15x110 mm, OverDrive post
Shock absorber FOX Float DPX2 performance, Trunnion Mount
Giant Contact handlebars, 800 x 35 mm, 20 mm increase
Giant Contact SL 35 stem
Seatpost Giant Contact Switch S, telescopic, 30.9 mm
Saddle Giant Contact SL (Neutral)
SRAM GX Eagle gears, 1x12 gears
SRAM GX Eagle derailleur
Brakes SRAM Code R, discs 200/180 mm
Brake levers SRAM Code R
SRAM XG-1275 Eagle cassette, 10-50 teeth
SRAM GX chain
Cranks Truvativ Descendant 6k Eagle Oak, Boost, 32-tooth converter, MRP AMG (V2) chain guide
Central composition SRAM GXP Dub Press Fit
Giant AM 27.5 rims, 30 mm inner width
Giant Tracker Performance Boost hubs, fixed axle 15x110 mm and 12x148 mm, encapsulated bearings
SAPI wires
Tires front: Maxxis Minion DHF 3C EXO TR, 27.5x2.5 WT, 60 TPI / rear: Maxxis DHR II 3C EXO TR, 27.5x2.4 WT, 60 TPI, tubeless
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | SRAM GX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 76217 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Dobrý deň
Vedeli by ste zohnať tento bicykel aj vo veľkosti L ?
Dobrý deň,
Dostupnosť preverujeme u dodávateľa, budeme Vás informovať.
Dobrý deň,
Veľkosť L má dodávateľ na sklade v počte 1 ks ale voľný je tento ks len do zajtra. Ak máte záujem o objednanie tak napíšte na [email protected]
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews