Giant Anthem 29er 3, 2019 model
Color Black / Metallic Black / Lemon Yellow
AluxX SL Aluminum frame, Maestro suspension, 90 mm travel
Fork RockShox Recon RL Solo Air, travel 100 mm, Boost solid axle 15x110 mm, OverDrive column
Shock absorber RockShox Deluxe RT, Trunnion Mount
Giant Contact SL XC Flat handlebars, 780 x 31.8 mm
Giant Contact stem
Giant Contact seat post, 27.2 mm
Saddle Giant Contact (Forward)
Shifting Shimano Deore, gears 2x10
Derailleur Shimano Deore M6020-D
Derailleur Shimano Deore Shadow +
Brakes Shimano BR-MT500, discs 180/160 mm
Brake levers Shimano MT-501
Cassette Shimano CS-HG500, 11-42 teeth
KMC X10-1 chain
Shimano Deore cranks, Boost, 36 / 26 tooth gears
Shimano Press Fit middle composition
Giant XCT 29 rims, 25 mm inner width
Giant Tracker Performance Boost hubs, fixed axle 15x110mm and 12x148mm, encapsulated bearings
SAPI wires
Tires Maxxis REKON Race EXO TR, 29 x 2.25, 60 TPI, tubeless
Model year | 2019 |
Gears | 2x10 |
Groupset | Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 76179 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews