Ghost Slamr 6.7 red, model 2019
Bike fitting discount 20 % (you will save 28 €)
Material: Aluminum
Wheel size: 27.5 "
Frame: SLAMR AL
Fork: RockShox Revelation RC Debon Air 140 mm
Derailleur: SRAM GX Eagle 12-S
Cranks: Truvativ Descendant 7K Eagle X-Sync 34T
Cassette: SRAM XG 1275 10-50
Brakes: SRAM Guide RS 4/4 Piston 180 mm Disc
Gear: SRAM GX Eagle
Head composition: 16012
Handlebars: Ground Fiftyone Race Riser Bar 780 mm Rise 20 mm Dia. 35 mm
Stem: Ground Fiftyone Team Dia. 35 mm
Seatpost: Satori Sorat Pre 31.6 mm
Saddle: SDG Fly Mountain
Spliced wheels: DT Swiss M 1900 Spline 30 mm Wheelset 15x110 mm // DT Swiss M 1900 Spline 30 mm Wheelset 12x142 mm SRAM XD
Shock absorber: RockShox Super Deluxe Coil MRC 130 mm
Front stroke: 140 mm
Rear stroke: 130 mm
Heel: FRHG0057
Number of speeds: 12
Front tire: Maxxis Minion DHR II 3C MaxxTerra Exo 27.5x2.4
Rear tire: Maxxis Minion SS Exo 27.5x2.3
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | Shimano Sora, SRAM GX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 59371 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Skvelá voľba, trail bike osadený na kvalitných komponentoch, univerzálny a zábavný. Pozor na typ pružiny v tlmiči (sériovo osadený 450 lb) je potrebné brať do úvahy hmotnosť jazdca pre typ pružiny viď. stránka výrobcu. Ináč nemám žiadne výhrady a určite odporúčam.
Translate by GoogleShow the original