Ghost Kato FS 3.7 GRAY / YELLOW, model 2018
Bike fitting discount 20 % (you will save 28 €)
Wheel size: 27.5
Fork: SR Suntour AION LO-R 130mm
Silencer: X-Fusion O2 Pro RL Air 130mm
Derailleur: Shimano XT RD-M8000 Shadow Plus 11-S
Converter: Shimano SLX FC-MT600 36-36
Brakes: Shimano 506 Disc 2/2 Piston 180mm Disc
Front tire: Continental X-King PureGrip 27.5x2.2
Rear tire: Continental X-King PureGrip 27.5x2.2
Wheels: Rodi Excalibur XC 584x19mm
Front hub: Shimano Deore HB-M6010 15x100mm
Rear hub: Shimano Deore FH-M6000 QR
Frame: KATO FS AL
Gear: Shimano SLX SL-M7000
Cranks: Shimano FC-MT600 36-26
Cassette: Shimano SLX CS-M7000 11-42
Handlebars: Ghost Low Rizer MTB 760mm, rise 15mm, 31.8mm
Stem: Ghost MTB 31.8mm
Seatpost: Ghost Light DC 1 31.6mm
Saddle: Selle Italia X-Base
Number of speeds: 22
Front stroke: 130mm
Rear stroke: 130mm
Heel: EZ1954
| Model year | 2018 |
| Gears | 2x11 |
| Groupset | Shimano XT, Shimano SLX, Shimano Deore |
| Material | aluminium |
| Control type | mechanical |
| product ID | 43674 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Vynikajúci bicykel. Dobrá cena. Zatiaľ úplná spokojnosť.
Translate by GoogleShow the original