Ghost Kato FS 2.7 AL iridium silver / riot red / jet black, model 2019
Wheel size: 27.5 "
Frame: KATO FS AL
Fork: SR Suntour XCR 34 LOR 130 mm
Derailleur: Shimano Deore RD-M6000 Shadow Plus 10-S
Cranks: Shimano Deore FC-M6000 Hollowtech II 34-24
Cassette: Shimano CS-HG500-10 11-42
Brakes: Tektro HD-M285 2/2 Piston 180 mm Disc
Gear: Shimano Deore SL-M6000
Head composition: 16012
Handlebars: GHOST Low Rizer MTB 760 mm Rise 15 mm Dia. 31.8 mm
Stem: GHOST MTB Dia. 31.8 mm
Seatpost: GHOST Light DC 1 31.6 mm
Saddle: Selle Italia X-Base
Front hub: Formula DC-511 15 x 110 mm
Rear hub: Formula DC 22 QR
Derailleur: Shimano Deore FD-M6020 Side Swing
Shock absorber: SR Suntour DUAIR 130 mm
Front stroke: 130 mm
Rear stroke: 130 mm
Heel: EZ1954
Number of speeds: 20
Rear rim: Rodi Excalibur XC 584x19 mm 32H
Front rim: Rodi Excalibur XC 584x19 mm 32H
Front tire: Michelin Country Race R 27.5 x 2.10
Rear tire: Michelin Country Race R 27.5 x 2.10
KATO models can be supplied with MITAS tires. The manufacturer reserves the right to change and / or improve the design and components without prior notice.
Model year | 2019 |
Gears | 2x10 |
Groupset | Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 63514 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews