Ghost Framr 6.7 Monarch Orange / Night Black, model 2019
Bike fitting discount 50 % (you will save 70 €)
At first glance, the revamped Ghost FR AMR 6.7 with a spring damper looks quite rough and with strokes of 170/165 mm it likes to show its muscles. With precise control, it devours the roughest sections of trails.
But at first glance, you will find that behind the rough exterior lies a sporting spirit that is not only used in enduro races and bike parks, but also enjoys climbing hills with vigor.
Ghost FR AMR is built on the proven AMR frame platform with modern geometry and 170 / 165mm strokes. The most fundamental changes are on the frame in the area of the rear structure. The frame is characterized by significantly increased rigidity, bearings and pins are less stressed, then:
• larger diameter of used chain stays,
• new attachment of the rear structure,
• one-piece rocker design,
• 64.5 ° fork for easier overcoming of obstacles,
• spring-loaded damper for maximum maintenance-free performance.
Ghost FR AMR 6.7 - Our fun machine for bike parks, or even for races. Rock'n'Roll!
Material: AluminumYear: 2019
Wheel size: 27.5 "
Frame: FR AMR AL
Fork: Cane Creek Helm 170 mm
Derailleur: SRAM X01 Eagle 12-S
Cranks: Truvativ Descendant 7K Eagle X -Sync 34T
Cassette: SRAM XG 1275 10-50
Brakes: SRAM Code RSC 4/4 Piston 200/180 mm Disc
Gear: SRAM GX Eagle
Head composition: 16012
Handlebars: Syntace Vector 780 mm Rise 20 mm Dia. 31.8 mm
Introduction: Syntax Megaforce2 Dia. 31.8 mm
Seatpost : RockShox Reverb Stealth 31.6 mm
Saddle: SDG Fly Mountain
Spliced wheels: DT Swiss M 1900 Spline 30 mm Wheelset 15x110 mm // DT Swiss M 1900 Spline 30 mm Wheelset 12x148 mm SRAM XD
Shock absorber: Fox DHX2 Coil 165 mm
Heel : FRHG0057
Number of speeds: 12
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo 27.5x2.5
Rear tire: Maxxis Minion DHR II Exo 27.5x2.4
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | SRAM X01, SRAM GX |
| Material | aluminium |
| Brakes | Hydraulic disc brakes |
| product ID | 61691 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews