Ghost FRAMR 4.7 Classic Tan / Jet Black, model 2020
Bike fitting discount 20 % (you will save 28 €)
Material: Aluminum
Frame: FRAMR AL
Fork: RockShox 35 Gold RL 160 mm
Derailleur: SRAM SX Eagle 12-S
Cranks: SRAM SX Eagle 32T
Middle composition: SRAM DUB Pressfit
Cassette: SRAM PG-1210 11-50
Chain: SRAM SX Eagle
Brakes: TRP G-Spec Trail SL 4/4 Piston 203 mm Disc
Handlebars: Ground Fiftyone Riser Bar 780 mm Rise 25 mm Dia. 31.8 mm
Grips: Ergon GA2
Stem: Ground Fiftyone Dia. 31.8 mm
Saddle: Ergon SMD2 Comp
Wheels: TRP 203 mm
Shock absorber: Fox Van RC Coil 165 mm
Front stroke: 160 mm
Rear stroke: 165 mm
Heel : FRHG0057
Front tire: Maxxis Minion DHF 3C MaxxTerra Exo + 27.5 X2.5
Rear tire: Maxxis Minion DHR II MaxxTerra Exo + 27.5x2.4
Modified color variant - according to B2B pattern: Classic Tan / Jet Black
Number of transfers: 12
Chain guide: e * thirteen TRS ISCG05 34T
Front tangled wheels: Syntace V30 15x110 mm
Rear tangled wheels: Syntace V30 12x148 mm
Maximum load: 120
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 88111 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Ghost FRAMR 4.7 Classic Tan / Jet Black, model 2020 je enduro bike?
Dobrý deň,
áno môžete ho použiť aj na enduro jazdenie.
Zdravim je este bike mozne objednat vo velkosti L?
Dobrý deň,
bohužiaľ vypredané.
Na akú váhu je pružina tlmiča zadného?
Dobrý deň, ospravedlňujeme sa za dlhšie čakanie, no kvôli vysokému dopytu a predaju sme nestihli odpovedať skôr. Pružina je do 90 kg.
Prajem pekný deň.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews