Cannondale Trigger 29 Carbon 2 mountain bike, model 2014
Bike fitting discount 50 % (you will save 70 €)
Fork- Lefty SuperMax PBR 130 29, w / Hybrid Needle Bearing Tech, 60mm offset
Muffler- Fox DYAD RT2 dual shock, 130 / 80mm, w / remote lever
Rims- Mavic Crossroc 29 WTS, tubeless ready
Hubs- Mavic Crossroc 29, SuperMax front, 142x12mm rear
Wires- Mavic Crossroc 29
Tires- Mavic Crossroc 29 WTS
Pedals- N / A
Cranks- SRAM S1400 AM, BB30, 36 / 22T w / guard
Middle composition - Cannondale PressFit30, SRAM Bearings
Chain- KMC X10, 10-speed
Cassette- Shimano M771, 11-36, 10-speed
Derailleur - SRAM X7, direct mount
Derailleur - Shimano XT, Shadow Plus
Gear levers- Shimano XT w / i-spec
Handlebars - Cannondale C1 riser, carbon, 740x15mm
Grips- Cannondale Dual Locking Grips
Stem- Cannondale C1, 1.5 ", 31.8, 5 deg.
Head Composition - Cannondale HeadShok Si
Brakes - Shimano XT Trail, 180 / 180mm
Brake levers- Shimano XT Trail
Seat - WTB Volt Cromo
Seatpost- KS LEV Integra dropper, internal routing, 31.6x385mm
Sizes- S, M, L, X
Colors - white-black-red
Extra- High pressure shock pump, Syntace X-12mm rear axle
| Model year | 2014 |
| Gears | 2x10 |
| Groupset | Shimano XT, SRAM X7 |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 4002 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews