Cannondale Scalpel Carbon SE 2
The ultimate racing marathon, high-speed trail conqueror, 120 mm strokes, Rock Shox Sid, Sram.
Frame: brand new BallisTec Carbon frame, 120 mm stroke, Proportional Response, FlexPivot rear construction, PF30-83 center, Tapered head tube, Speed Release 12 mm thru axle, Ai Offset
Fork: Rock Shox Sid Select
Muffler: Rock Shox SidLux
Cranks: Truvativ Stylo 6K OAK axis, 34 teeth, Ai offset
Middle composition: SRAM OAK PF30 MTB 83 mm
Gear levers: SRAM SX Eagle, 12 speeds
Cassette: SRAM PG-1230, NX Eagle, 11-50 teeth, 12 speeds
Chain: SRAM SX Eagle, 12 speeds
Derailleur: not fitted
Derailleur: SRAM SX Eagle 12 speeds
Rims: Stans NoTubes Crest S1, 32 holes, tubeless ready
Hubs: front Shimano Deore 15x110 mm, rear Shimano Deore 12x148 mm
Pedals: not included
Brakes: Shimano MT500 hydraulic disc, 180/160 mm RT54 discs
Stem: Cannondale 3, 6061 Alloy, 31.8 mm, 7 °
Head composition: Integrated Sealed Bearing, Tapered
Handlebars: Cannondale riser, weakened aluminum alloy 6061, 31.8 mm, 5 ° rise, 9 ° sweep, 760 mm wide
Brake levers: Shimano MT500 hydraulic disc
Spikes: Stainless Steel, 14g
Tires: front Maxxis Ardent Race, 29 x 2.35 ", EXO Protection, tubeless ready, rear Maxxis Recon Race, 29 x 2.25", EXO Protection, tubeless ready
Saddle: Fabric Scoop Radius Sport, steel rails
Seatpost: Cannondale DownLow Dropper telescopic, inner guide, 31.6 mm, 100 mm stroke (size S), 125 mm stroke (size ML), 150 mm stroke (size XL)
Sizes: S, M, L, XL
Grips: ESI Silicone 32 mm grips
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano Deore, SRAM NX, SRAM SX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 108712 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews