Cannondale Habit 4, model 2020, dark blue
Bike fitting discount 20 % (you will save 28 €)
Fork: Fox Float Rhythm 34, 140mm, Grip Damper, Sweep-Adj, 15x110, tapered steerer, 51mm offset
Muffler: Fox Float Performance DPS EVOL, 3 -Pos adj.
Cranks: SRAM X1-1000 Eagle DUB, 30T, Ai offset
Middle composition: SRAM OAK BSA MTB83
Gearing: SRAM NX Eagle, 12-speed
Cassette: SRAM PG-1230, NX Eagle, 11-50, 12-speed
Chain: SRAM NX Eagle, 12-speed
Derailleur: SRAM NX Eagle
Rims: WTB ST I25 TCS 2.0, 32h, tubeless ready
Hubs: (F) Formula 15x110 (R) Formula 12x148 w / HG driver 12x148
Brakes: SRAM Guide T hydro disc, 180 / 180mm Centerline rotors
Stem: Cannondale 3, 3D Forged 6061 Alloy, 1-1 / 8 ", 31.8, 0 °
Head composition: Integrated, 1-1 / 8 to 1.5 ", sealed angular contact bearings
Handlebars: Cannondale 3 Riser, 6061 Alloy, 15mm rise, 8 ° sweep, 4 ° rise, 780mm
Brake levers: SRAM Guide T hydro disc
Tip: Stainless steel, 14g
Tires: (F) Maxxis Minion DHF 29 x 2.5 "WT, Dual compound, EXO puncture protection, tubeless ready (R) Maxxis High Roller II 29 x 2.3", Dual compound, EXO puncture protection, tubeless ready
Saddle: Fabric Scoop Shallow Sport, steel rails
Seatpost : Cannondale DownLow Dropper, internal routing, 31.6, 125mm (S), 150mm (M-XL)
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | SRAM X1, SRAM NX |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 90035 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Vedeli by ste mi tento model Cannondale Habit 4, model 2020, tmavomodrý - objednať záloha 1000,-€ možno 1500,-€ pravdepodobné doplatenie do 60dní ? ďakujem za spätnú väzbu
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Dnes som mal predčastné vianoce tento krásavec mi spravil deň dokonalím
Translate by GoogleShow the original