Rock Machine Blizz CRB 90-29
Bike fitting discount 20 % (you will save 28 €)
Stroke: 120 mm
Fork: Rock Shox SID RL Tapered, 15 mm Boost, remote LO, DebonAir/Charger Damper
Cranks and shifters: SRAM Descendant carbon Eagle Boost 34T
Derailleur: SRAM X01 Eagle X-Horizon
Number of gears: 1x12
Shifting: SRAM GX Eagle Trigger Shifter
Cassette: SRAM XG-1275-12 Eagle 10-50T
Chain: SRAM GX Eagle
Brakes: SRAM Level TLM hydraulic disc brake 180/160 mm
Center composition: SRAM BB DUB PF92
Head composition: FSA DX PRO2
Front hub: Bitex Light 15×110 mm
Rear hub: Bitex Light 12×148 mm
Rims: WTB ST Light i23 TCS 2.0 32H
Spikes : Sapim Race Black Butted
Tires / Tubes: WTB Nine Line Race DNA 29×2.25"
Stem: Race Face Turbine 35 mm
Handlebars: Race Face Next carbon 35 mm riser
Grips: ONE MTB Lock-on
Seat post: Race Face Next carbon
Saddle: WTB Volt 142
Weight: 10.2 kg (size M)
| Model year | 2019 |
| Gears | 1x12 |
| Groupset | SRAM X01, SRAM GX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 70355 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Zdravim, je mozne na tento ram namontovat teleskopku bez rozoberania stredu? (Vnutorne vedenie)
Dakujem
Zdravim, ak si to spravne pamatam, tak ano, je nutne ten stred rozobrat, na 95%.
Dobrý deň dalo by sa dať na tento bicykel 2 prevodníky?
Ďakujem za odpoveď
Dobrý deň,
Rám žiaľ nemá možnosť uchytenia prešmyku čiže nie je to možné.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

Lahky Trail/XC bike so 120mm zdvihom a pri tejto cene bezkonkurecny pomer cena/vykon. Trosku bojujem s tvarom a materialom sedla ( smyka sa), ale to je individualne zalezitost.
Translate by GoogleShow the original