Rock Machine AVALANCHE 70 (test), model 2016
Rock Machine Avalanche mountain bikes are created for riding in snow, sand, but also on forest trails.
Notice:
This bike is ridden and was used as a test bike. For this reason, it is discounted. By confirming the order, the customer declares that he has been informed of this fact and is aware that this is not a new bicycle. Defects caused by use: damaged paint on the frame, worn seat, tires.
Sizes/ Weight (kg): 17.0", 19.0", 21.0"/ 15.0
Frame, stroke (R/Z mm): Alu 6061.T6 Multibutted
Fork: Alloy rigid Superlight
Cranks with shifters: FSA Comet MegaExo 36/22T
Front derailleur: Shimano Deore D-type
Rear derailleur: Shimano XT GS Shadow Plus
Shifters : Shimano Deore RapidFire Plus 2x10
Cassette: Shimano HG50-10 11-36T
Chain: KMC X10
Brakes: Shimano BR-M396 hydraulic disc brake, rotor 180/160mm
Center compound: FSA MegaExo
Headstock : FSA Orbit 1.5E ZS No.57E
Hubs: ONE Fat 150/190mm
Rims: HL80 Fat Bike 32H
Tip: Stainless
Tires /Tubes: Fat Bike 26x4.0"
Stem: ONE Sport 31.8mm
Handlebars: ONE Sport
Grips: ONE MTB Lock-on dual density kraton-gel
Seat post: ONE Sport
Saddle: RM Peak Race
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano XT, Shimano Deore |
product ID | 84973 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews