Mongoose Tyax 29 Expert bike, black/blue
Bike fitting discount 20 % (you will save 28 €)
Mongoose Tyax 29 Expert bike l
Mongoose Tyax 29 Expert 2021 with a new lightweight frame redesigned from the ground up, has everything you need to explore XC tracks and singletrails.| Frame |
Tectonic T2, aluminum, 29" cross country geometry, internal cable routing, 9 mm x 141 mm QR dropout convertible to 12 mm x 148 mm thru axle, replaceable hanger, tapered headtube
|
| Fork |
SR Suntour XCR Air, 29", aluminum steerer, hydraulic lockout, 9 mm x 100 mm, QR, 100 mm travel
|
| Derailleur |
SRAM SX Eagle
|
| Cassette |
SRAM, 12-speed, 11-50T
|
| Chain |
SRAM SX 12spd
|
| Cranks |
SRAM SX Powerspline, aluminum, 30T
|
| Brakes |
Shimano BR-M400, hydraulic, aluminum, 160 mm rotor
|
| Brake levers |
Shimano BR-M400
|
| Rims |
WTB ST-i29, aluminum double wall, 29 mm ID, 32H, tubeless compatible
|
| Hubs |
Shimano HB-MT200B, aluminum, ball bearing, 9 mm x 100 mm, 32H, CENTER LOCK Shimano FH-MT200B, aluminum, ball bearing, 9 mm x 141 mm QR, 32H, CENTER LOCK
|
| Tires |
Kenda Kadre, 29x2.20", wire bead
|
| Seat post |
Xposure, aluminum, 350 mm, zero offset, 31.6 mm
|
| Saddle |
Mongoose MTB, steel rails
|
| Stem |
X Posure 3D forged aluminum, Threadless, 60 mm / 70 mm, 6 °, 31.8 mm clamp
|
| Handlebars |
Xposure, double-butted aluminum, 740 mm width, 15 mm rise, 31.8 mm clamp
|
| Headset |
Threadless, ZS44/ZS56, retainer bearing
|
| Pedals |
Mongoose, nylon
|
| Shift levers |
SRAM SX Eagle, 12-speed
|
| Spokes |
14G, stainless steel
|
| Sex | Men, Unisex |
| Model year | 2021 |
| Gears | 1x12 |
| Groupset | SRAM SX |
| Size | XL |
| Colour | black, blue |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc |
| Fork | Air |
| Fork travel | 100 mm |
| Control type | mechanical |
| product ID | 121834 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews