Mondraker Chrono Carbon 29, Dirty White / Carbon
savings BMC Twostroke AL ONE 29 bike, poison green/black
1,249.90 €
savings
RRP 2,099 €
savings Raymon HardRay 8.0 29 bike, stone metallic/black
1,649.90 €
savings
RRP 2,499 €
Frame: Chrono 29 Stealth full Carbon, XC Forward Geometry, 73mm BSA bottom bracket, tapered head tube, HHG Internal Cable routing, Boost 12x148mm rear axle, Comfort Flat chainstays (Flatstays) design
Fork: RockShox Judy Gold RL 29, 100mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110mm axle, 30mm aluminum stanchions, offset 51mm. Settings: Onelock 2 pos remote compression (open / lock), rebound, air preload
Head composition: Onoff Titan tapered for 1-1 / 8 ”to 1-1 / 2” head tube, ACB sealed bearings, top 41.8x30.5x8x45ºx45º, bottom 51.9x40x8x45ºx45º
Gearbox : Sram NX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1: 1
Gear: Sram Trigger SX Eagle, 12s, X-Actuation 1: 1
Brake levers: Sram Level, tooled reach adjust, lever pivot bushings
Cranks: Sram SX Eagle, Boost, OAK axle, Direct Mount chain ring, S size: 170mm, M / L / XL size: 175mm
Middle composition: Sram OAK BSA, sealed bearings, 73mm
Handlebars: Onoff Sulfur 0.2, double butted 6061 alloy, rise: 4.8mm, width: 760mm, 9º backsweep, 0º upsweep, 31.8mm barbore
Stem: MDK, 6061 T6 Alloy, 31.8mm barbore, rise: +/- 5º, length: size S: 60mm, size M: 70mm, size L: 80mm, size XL: 90mm
Seatpost : Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2mm, length 400mm
Saddle: Mondraker XC Series, steel rail
Front hub: Formula DC711, Boost 15x110mm, sealed bearings, IS 6 bolts
Rear hub: Formula MST148S-4SB, Boost 12x148mm, sealed bearings, IS 6 bolts
Chain: Sram SX Eagle, 12s, Powerlock
Cassette: Sram XG-1230, 11-50T, 12p
Tip: CN round stainless steel
Rims: MDK-XP1 29 TLR, 25mm internal width, tubeless ready, 32 spokes
Tires : Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead, Maxxis Ikon 29x2.20, 3CMaxx Speed compound, tubeless ready, 120TPI, folding bead
Grips: Onoff Diamond, 1lock-on, 135mm
Front brake: Sram Level T, 2 piece caliper, Centerline 160mm IS 6 bolts one-piece rotor, steel-backed organic pad
Rear brake: Sram Level T, 2 piece caliper, Centerline 160mm IS 6 bolts one-piece rotor, steel-backed organic pad
Converter: 34T, steel, X-Sync 2
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | SRAM NX, SRAM SX |
| Material | carbon fiber |
| Brakes | Hydraulic disc brakes |
| product ID | 151798 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews