Marin San Quentin 3 29 bike, purple fade
Choose personal pickup at the store and decide on the spot.
Bike fitting discount 20 % (you will save 28 €)
Marin San Quentin 3 29 bike
| Frame |
Series 3 6061 Aluminum, Double Butted, Internal Cable Routing, 12x148mm Thru-Axle, 73mm Threaded BB
|
| Fork |
Marzocchi Bomber Z2, 110x15 mm Boost Spacing, 140 mm Travel, Kabolt Axle
|
| Shifting |
Shimano Deore, 12-Speed, SL-6100IR
|
| Derailleur |
Shimano Deore, 12-Speed, SGS
|
| Cassette |
SunRace, 12-Speed, MicroSpline, 10-51T
|
| Chain |
KMC X-12 Silver and Black
|
| Crankset |
FSA Comet, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing
|
| Brakes |
TRP Slate EVO, 4-Piston Hydraulic, Resin Pads, 203mm/180mm Rotor
|
| Brake levers |
TRP Slate EVO, I-Spec EV Compatible
|
| Rims |
Marin Aluminum Double Wall, Disc Specific, 29 mm Inner, Sleeved Joint, 32H, Tubeless Compatible
|
| Front hub |
Shimano HF-MT410B, 110x15 mm, 32H
|
| Rear hub |
Shimano HB-MT410B, 148x12 mm, 32H, MicroSpline Freehub Body
|
| Tires |
Maxxis Assegai, 29x2.5 MAXX TERRA, EXO Casing, Tubeless Compatible
|
| Seat post |
TranzX, YSP23JL, 1x Remote, Size S 125 mm Travel, Size M 150 mm Travel, Size L-XL 170 mm Travel, 30.9 mm
|
| Saddle |
Marin Speed Concept
|
| Stem |
Marin 3D Forged Alloy, 35 mm
|
| Handlebars |
Marin Mini-Riser, 6061 Double Butted Aluminum, 780 mm Width, 28 mm Rise, 5º Up, 9º Back
|
| Grips |
Marin Grizzly Lock On
|
| Headset |
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2"
|
| Bottom bracket |
FSA MegaExo 73mm BSA
|
| Pedals |
Marin MTB Plastic
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 1x12 |
| Groupset | Shimano Deore |
| Colour | purple fade |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 140 mm |
| Dropper post | yes |
| Control type | mechanical |
| product ID | 384820 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 165 cm | 165 - 178 cm | 178 - 188 cm | 188 - 198 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews