Liv Tempt 2 29 women's bike, mars dust
Bike fitting discount 20 % (you will save 28 €)
Liv Tempt 2 29 women's bike
| Frame |
ALUXX-grade aluminum, disc
|
| Fork |
Giant SXC32‑3 RL coil‑spring fork, Boost 15x110 mm thru‑axle, tapered steerer, travel 80 mm
|
| Shifting |
MicroShift Advent 1x9
|
| Derailleur |
MicroShift Advent, 1x9, RD-M6195M
|
| Cassette |
MicroShift CS‑H093, 11‑46T
|
| Chain |
KMC X9
|
| Crankset |
ProWheel Charm, 30T
|
| Brakes |
Tektro HDC TKD 149 hydraulic
|
| Brake discs |
Tektro rotors: front 180 mm, rear 160 mm
|
| Wheels |
Giant GX03V alloy
|
| Tires |
Maxxis Recon Race 29×2.4″, 60tpi
|
| Seat post |
Giant Sport, 30.9 mm
|
| Saddle |
Liv ErgoContact Trail
|
| Stem |
Giant Sport
|
| Handlebars |
Giant Connect Trail
|
| Bottom bracket |
cartridge
|
| Pedals |
MTB caged pedals
|
| Sex | Women |
| Model year | 2026 |
| Gears | 1x9 |
| Groupset | microSHIFT ADVENT |
| Colour | mars dust |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Spring |
| Fork travel | 80 mm |
| Dropper post | yes |
| Control type | mechanical |
| product ID | 382809 |
| Bike size | XS | S | M | L |
|---|---|---|---|---|
| Height (cm) | < 163 cm | 158 - 169 cm | 164 - 175 cm | 170 - 183 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews