Lapierre Prorace SAT CF 6.9, model 2021
Lapierre Prorace SAT - a balanced XC racing bike that will not be afraid of any technical passage.
The Lapierre developers are working hard and the results are original. In addition to the new geometry, the main novelty is the use of SAT technology, which we know from Lapierre road models.
The SAT (Shock Absorption Technology) used on this frame adds a special elastomer between the main frame triangle and the rear struts. This damping element is able to absorb vibrations and shocks coming from the rear wheel while maintaining high lateral rigidity. Which is immediately reflected in the increased comfort while maintaining the extreme lateral rigidity of the frame.
Lapierre Prorace SAT 6.9 is characterized by excellent efficiency during the ascent and easy handling on downhill.
Category: MTB Hardtail
Year: 2021
Wheel size: 29 "
Frame: PRORACE SAT 29 "CARBON, BOOST, PRESSFIT, THRU AXLE 12x148
Fork: SUNTOUR RAIDON32 REMOTE QR15mm AIR 100mm BOOST
Derailleur: SHIMANO DEORE 12spd
Cranks: SHIMANO DEORE FCM-511 12spd 170mm / 32T (XS, S), 175mm / 32T (M, L, XL)
Middle composition: Shimano PF MTB92
Cassette: Shimano Deore 12spd 10-51T (CSM6100)
Chain: SHIMANO DEORE 12spd
Brakes: SHIMANO MT401 INTERNAL_AUTHENTICATE ROUTING WITH J-KIT
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: Lapierre 6061 TOP FLAT W: 720mm Ø: 31.8mm
Grips: PRE FOAM GRIPS
Stem: Lapierre ALLOY 3D FORGED 7 ° Ø: 31.8mm L: 70mm (S, M, L) / 90mm (XL)
Seatpost: Lapierre ALLOY FORGED Ø: 27.2mm L: 400mm
Saddle: Lapierre by VELO
Front hub: SHIMANO MT400 THRU AXLE
Rear hub: SHIMANO MT410 - Microspline
Pedals: NW 91K steel cage
Wheels: SHIMANO SMRT30 180mm / 160mm CENTER LOCK
Front fork stroke: 100
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano Deore |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 120956 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews