Lapierre PRORACE 9.9 SAT, model 2020
The top model of the Lapierre ProRace SAT mountain bike combines comfort, control and great performance. Thanks to the lightweight carbon frame and geometry created for maximum performance, the Lapierre ProRace SAT is an exceptional means of driving on marathon routes even while breaking records on your favorite sections. Another advantage of this model is SAT technology. It is an inserted elastomer between the main frame triangle and the rear struts. The rear struts together with the seat tube allow the elastomer to perform the function of a small damper, because thanks to their flexibility they leave room for vertical movement of the rear wheel.
Material: Carbon
Wheel size: 29 "
Frame: PRORACE SAT 29 "CARBON ULTIMATE, BOOST, PRESSFIT, THRU AXLE 12x148
Fork: FOX 32 SC "ORANGE" FACTORY Kashima 29 '' 100mm BOOST + 2 POSITION REMOTE
Derailleur: SRAM XX1 EAGLE AXS 12s
Cranks: SRAM XX1 EAGLE BLACK CARBON OAK 32T 170mm (S), 175mm (M, L, XL)
Cassette: SRAM XG1295 EAGLE 10-50 12spd
Chain: SRAM X01 Eagle
Brakes: SRAM LEVEL ULTIMATE CARBON BLACK
Gearing : SRAM XX1 EAGLE AXS 12s
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: FSA SLK CARBON FLAT W: 740mm Ø: 31.8mm
Grips: PRE FOAM GRIPS
Stem: Lapierre 7050 ALLOY 3D FORGED 7 ° Ø: 31.8mm L: 70mm (S, M, L) / 90mm (XL)
Seatpost: Lapierre CARBON Ø: 27.2mm L: 400mm
Saddle: Physical TUNDRA M5 BLACK
Tires : 29X2.25 MAXXIS ARDENT / 29X2.20 ICON FOLDING BLACK 60TPI
Pedals: NW 91K steel cage
Spliced wheels: Lapierre CARBON XC 29 '' BOOST XD DRIVER
Wheels: SRAM CENTERLINE Rounded 180mm / 160mm
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM XX1, SRAM X01 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 88303 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews