Lapierre PRORACE 929 Ultimate, model 2018
Frame PRORACE SAT 29" CARBON ULTIMATE, PRESSFIT, BOOST, THRU AXLE
Fork ROCKSHOX SID WORLD CUP 29" MXL ULTIMATE SOLO AIR100MM + ONELOC
Derailleur SRAM XX1 EAGLE GOLD TYPE 2.1 CARBON 12s
SRAM X01 EAGLE shifting
SRAM LEVEL ULTIMATE CARBON GOLD front brake
Rear brake SRAM LEVEL ULTIMATE CARBON GOLD
Shifter SRAM X1 XX1 EAGLE GOLD DIRECT MOUNT XSYNC 32T 170mm(S), 175mm (M,L,XL)
Head assembly FSA ORBIT 1.5E ZS NO.57ECF
Cassette SRAM XG 1299 GOLD 12s 10-50T
SRAM XX1 EAGLE GOLD chain
Handlebars RACEFACE NEXT CARBON W: 720mm ?: 31.8mm
Stem LAPIERRE ST148A 7050 ALLOY 7° ?: 31.8mm L: 70mm(S, M, L)/ 90mm (XL)
Seatpost LAPIERRE ST66-TC CARBON ?: 27.2mm L: 400mm
FIZIK TUNDRA saddle
Grips FOR FOAM GRIPS
Front Hub -
Rear hub SRAM LEVEL ULTIMATE CARBON GOLD
Front tire 2.25 MAXXIS ARDENT/ 2.20 IKON FOLDING SKINWALL 60TPI TLR
Rear tire 2.25 MAXXIS ARDENT/ 2.20 IKON FOLDING SKINWALL 60TPI TLR
LAPIERRE CARBON XC 29 braided wheels
Weight 9.4 kg
Front stroke 100mm
Pedals FP917
SRAM PRESS FIT MTB central compound (89/91.5)
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM XX1, SRAM XX, SRAM X01, SRAM X1 |
Material | carbon fiber |
product ID | 49776 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews