Lapierre PRORACE 629 SAT, model 2018
Bike fitting discount 20 % (you will save 28 €)
Year: 2018
Wheel size: 29
Frame: PRORACE SHOCK ABSORBER TECH. 29 "CARBON, PRESSFIT, BOOST, THRU AXLE
Fork: RockShox REBA RL 29 "BOOST ™ 15X110 SOLO AIR 100MM + ONELOC
Derailleur: SRAM NX 11s
Cranks: RACEFACE AEFFECT 30T DIRECT MOUNT ALLOY 170mm (S), 175mm (M, L, XL)
Center composition: SHIMANO SMBB7141A PRESSFIT
Cassette: SRAM PG1130 11-42T
Chain: SRAM PC1110 PowerLock
Brakes: SRAM LEVEL
Gearing: SRAM NX
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: Lapierre MTB11AFS TOP FLAT W: 720mm Ø: 31.8mm
Grips: PRE FOAM GRIPS
Stem: Lapierre ST112AT 7050 ALLOY 7 ° Ø: 31.8mm L: 70mm (S, M, L) / 90mm (XL)
Seatpost : Lapierre SP66 -2 2014 ALLOY Ø: 27.2mm L: 400mm
Saddle: Lapierre by VELO
Front hub: FORMULA DC-7131 15x110 32H WITH TORQUE CAPS
Rear hub: FORMULA DCL-348S 12x148 BOOST 32H
Rims: RODI READY 21 DISC 622x21 32H
Tires : 2.25 MAXXIS ARDENT / 2.20 ICON FOLDING Skinwall 60TPI TLR
Pedals: FP917
Wheels: SRAM G2 CleanSweep 180mm / 160mm 6 BOLT TYPE
Front stroke: 100mm
| Model year | 2018 |
| Gears | 1x11 |
| Groupset | SRAM NX |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 49890 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews