Lapierre Prorace 3.9 29 bike, silver
Lapierre Prorace 3.9 29 bike
A frame with a modern racing geometry made of patented Supreme 5 lightweight alloy with Boost standard, 29 inch wheels and a mix of carefully selected components make the Lapierre Prorace 3.9 a fast, powerful and affordable hardtail. Whether you are a beginner or an experienced rider, you will appreciate the excellent efficiency during the climbs and the easy handling on the descents.Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
PRORACE 29" SUPREME 5 ALLOY DISC, BOOST, PRESSFIT, TA 12x148, INT BRAKE RR
|
Fork |
SR Suntour RAIDON REMOTE QR15 mm AIR 100 mm BOOST
|
Shifting |
Shimano Deore 12s
|
Derailleur |
SHIMANO Deore M6100 12spd
|
Cassette |
Shimano Deore 12spd 10-51T (CSM6100)
|
Chain |
SHIMANO Deore 12spd (CN-M6100)
|
Cranks |
SHIMANO FCM-510 12spd 170 mm/32T (XS, S), 175 mm/32T (M, L, XL)
|
Brakes |
SHIMANO MT200 WITH J-KIT / SHIMANO SMRT30 180 mm / 160 mm CENTER LOCK
|
Hubs |
SHIMANO MT400 / SHIMANO MT410 - Microspline
|
Seat post |
LAPIERRE ALLOY Ø: 27.2 mm L: 400 mm
|
Saddle |
LAPIERRE would VELO
|
Stem |
LAPIERRE ALLOY 3D FORGED 7° Ø: 31.8 mm L: 60 mm (XS, S) / 70 mm (M, L) / 80 mm (XL)
|
Handlebars |
LAPIERRE 6061 TOP FLAT W: 720 mm Ø: 31.8 mm
|
Grips |
LAPIERRE by HERRMANS DD30B
|
Headset |
FSA ORBIT 1.5Z SC NO.57SC
|
Bottom bracket |
Shimano PF MTB92
|
Pedals |
NW 91K Steel cage
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | XS, S, M, L, XL |
Colour | silver |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 88297 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews