Lapierre Edge 9.9 29 bicycle, blue
Lapierre Edge 9.9 29 bike
Frame |
Edge 29" Supreme 5 alloy Disc
|
Fork |
RockShox Judy Silver TK Remote 29 QR COIL 100 mm
|
Shifting |
Shimano Deore SL-M6100-R 12s
|
Derailleur |
Shimano Deore RD-M6100 Shadow plus SGS, 12s
|
Cassette |
Shimano Deore CS-M6100-12 12s Hyperglide+
|
Chain |
KMC X-12 12s
|
Cranks |
Shimano Deore FC-M5100-1 2-piece 30T 170 mm (S) / 175 mm (M/L/XL)
|
Brakes |
Shimano MT200 hydraulic brakes Disc
|
Rims |
Lapierre Disc, 32H, 29", 21-622
|
Hubs |
Shimano HBTX505, 32H Center Lock QR
|
Front tire |
Schwalbe Tough Tom 29x2.25 622-57
|
Rear tire |
Schwalbe Rapid Rob 29x2.25 622-57
|
Seat post |
XLC alloy, Ø: 31.6 mm, L: 400 mm
|
Saddle |
XLC by DDK
|
Stem |
XLC alloy, 6°, Ø: 31.8 mm, L: 60 mm
|
Handlebars |
XLC alloy 6061 Top flat, Width: 720 mm, Ø: 31.8 mm
|
Grips |
HERRMANS LOCK-ON DD30B 130 mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | S, M, L, XL |
Colour | blue |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 206770 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews