Kellys Stage 50, model 2016
frame size: S (425mm) / M (475mm) / L (525mm)
fork: ROCK SHOX Recon Gold TK (29), 100mm, Solo Air / OneLoc Remote Lockout / Maxle Lite 15mm thru axle
main composition: FSA 1.5 integrated
middle composition : SHIMANO Press-Fit BB71-41A
cranks: SHIMANO SLX M675 Hollowtech II (38x24) - length 170mm (S), 175mm (M - L)
gearing: SHIMANO SLX SL-M670-B I-spec Rapidfire Plus
derailleur: SHIMANO SLX M675-E2 (direct mount)
gearbox : SHIMANO Deore XT M781
number of transfers: 20
cassette pinion: SHIMANO CS-HG500-10 (11-34)
chain: KMC X10L (112 links)
brakes: SHIMANO Deore M615 Hydraulic Disc
brake discs: front 180mm / rear 160mm
Brake Levers: SHIMANO Deore BL-M615
fixed axle: front ROCK SHOX Maxle Lite 15x100mm / rear SHIMANO AX65 12x142mm
twisted wheels: MAVIC Crossride Light (29)
tires: SCHWALBE Rapid Rob 57-622 (29x2.25)
stem : KLS Expert - diam 28.6mm / bar bore 31.8mm / 7 ° / length 70mm (S), 80mm (M), 90mm (L)
handlebars: KLS Master FlatBar - bar bore 31.8mm / width 680mm (S), 700mm (M), 720mm (L)
handles: KLS Advancer LockOn gel
seatpost: KLS Master - diam 27.2mm / length 350mm (S), 400mm (M - L)
saddle: KLS Avenger
pedals: SHIMANO M505 SPD (footprints)
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | carbon fiber |
product ID | 28725 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews