Kellys Hacker 90 29 "black
Frame size: M / L
Fork: ROCK SHOX SID Ultimate (29) Boost, 110mm, DebonAir / Charger Race Day / OneLoc Remote Lockout / Maxle Stealth 15mm thru axle
Main composition: FSA 1.5 integrated
Medium composition: SRAM DUB PressFit
Cranks: SRAM X01 Eagle OAK X-Sync 2 (34T) - length 175mm
Gear: SRAM X01 Eagle X-Actuation Trigger
Converter: SRAM X01 Eagle X-Horizon
Number of transfers: 12
Cassette pinion: SRAM XG-1295-12 Eagle (10-50T)
Chain: SRAM X01 Eagle (114 articles)
Brakes: SHIMANO XTR M9100 Hydraulic Disc
Brake discs: front 180mm / rear 160mm
Brake levers: SHIMANO XTR BL-M9100
Fixed axle: front ROCK SHOX Maxle Stealth 15x110mm / rear Mr.control 12x148mm
Spliced wheels: DT SWISS XR 1700 Spline 29 XD (15x110mm / 12x148mm)
Tires: front SCHWALBE Racing Ray Performance 57-622 (29x2.25) folding / rear SCHWALBE Racing Ralph Performance 57-622 (29x2.25) folding
Stem : RITCHEY WCS C220 84D - diam 28.6mm / bar bore 31.8mm / 6 ° / length 90mm
Handlebars: RITCHEY WCS FlatBar - diam 31.8mm / rise +/- 5mm / width 740mm
Handles: KLS Silica
Seatpost: KS LEV Integra Remote Telescopic - diam 30.9mm / length 392mm, stroke 125mm
Seat : phase: k Antares R7 S-alloy rails
Pedals: plastic
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano XTR, Shimano XT, SRAM X01 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 124661 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
