Kellys Hacker 90 29 bike, black/red - test model
Bike fitting discount 50 % (you will save 70 €)
Kellys Hacker 90 29 bike, black/red
Test model.| Frame |
KELLYS iCAD Carbon Pro 29, tapered HT, internal routing, 12x148 mm Boost thru axle
|
| Fork |
FOX 32 Factory SC - Kashima Coat (29) Boost, 100 mm, Float Evol air / FIT4 damper / 2-Position Remote / Open Mode Adjust / 15QR thru axle
|
| Shifting |
SRAM X01 Eagle 12-Speed X-Actuation Trigger
|
| Derailleur |
SRAM X01 Eagle X-Horizon
|
| Chain |
SRAM X01 Eagle (114 links)
|
| Cranks |
SRAM X01 Eagle DUB 1x X-Sync 2 (34) - length 170 mm (S), 175 mm (M - L)
|
| Brakes |
SHIMANO XTR M9100 Hydraulic Disc
|
| Brake levers |
SHIMANO XTR BL-M9100
|
| Brake discs |
front 180 mm / rear 160 mm
|
| Wheels |
MAVIC Crossmax Elite 29 (15x110 mm / 12x148 mm)
|
| Tires |
Front: SCHWALBE Racing Ray Performance 57-622 (29x2.25'') folding
Rear: SCHWALBE Racing Ralph Performance 57-622 (29x2.25'') folding |
| Seat post |
KS - LEV Integra - Remote Telescopic - diam 30.9 mm / length 392 mm, travel 125 mm
|
| Saddle |
fi´zi:k Antares R7 Manganese
|
| Stem |
RITCHEY WCS C220 84D - diam 28.6mm / bar bore 31.8 mm / 6° / length 80 mm (S), 90 mm (M - L)
|
| Handlebars |
RITCHEY WCS FlatBar - diam 31.8 mm / width 710 mm (S), 740 mm (M - L)
|
| Grips |
KLS Silica
|
| Pedals |
KLS Master
|
| Headset |
FSA 1.5 integrated
|
| Bottom bracket |
SRAM DUB PressFit
|
| Gears |
1x12
|
| Cassette pinion |
SRAM XG-1295-12 Eagle (10-50)
|
| Thru axle |
Front: FOX 15QR 15x110 mm
Rear: Mr.CONTROL 12x148 mm |
| Warranty |
12 months
|
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | Other |
| Weight | 9.30 kg (S) |
| Material | carbon fiber |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 68341 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews