Kellys Hacker 30 29 bike, white
Kellys Hacker 30 29 bike
Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding, from cycle paths, fields and forest roads to moderately demanding terrain. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
KELLYS iCAD Carbon Sport 29, tapered HT, internal routing, 12x148 mm Boost thru axle
|
Fork |
RockShox Recon Silver RL (29) Boost, 100 mm, Solo Air / Motion Control / OneLoc Remote Lockout / Maxle Lite 15 mm thru axle
|
Shifting |
SHIMANO Deore (021) M6100-IR Rapidfire Plus (I-Spec EV)
|
Derailleur |
Shimano SLX M7100 (direct mount)
|
Cassette |
SHIMANO (021) CS-M6100-12 (10-51T)
|
Chain |
SHIMANO (021) CN-M6100 (114 articles)
|
Cranks |
Shimano MT610 (34T) - length 170 mm (S), 175 mm (M - L)
|
Brakes |
SHIMANO Deore (021) MT410 Hydraulic Disc
|
Brake levers |
SHIMANO Deore (021) BL-M4100
|
Brake discs |
front 180mm/rear 160mm
|
Rims |
KLS Cartel Disc 622x21 (32 holes)
|
Hubs |
Shimano MT400-B / MT510-B Disc Center Lock (15x110mm / 12x148mm / 32 holes)
|
Spokes |
SAPIM - stainless steel black
|
Tires |
Schwalbe Rapid Rob 57-622 (29x2.25")
|
Seat post |
KLS Advanced - Ø - 30.9 mm / length 350 mm (S), 400 mm (M - L)
|
Saddle |
KLS Avenger
|
Stem |
KLS Advanced - Ø - 28.6 mm / bar bore Ø - 31.8 mm / 7° / length 80 mm (S - M), 100 mm (L)
|
Handlebars |
KLS Advanced FlatBar - Ø - 31.8 mm / width 720 mm
|
Grips |
KLS Poison OneLockon
|
Headset |
FSA 1.5 integrated
|
Bottom bracket |
Shimano Press-Fit BB-MT500-PA
|
Pedals |
plastic
|
Thru axle |
front RockShox Maxle Lite 15x110 mm/rear Mr.control 12x148 mm
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Size | S, M, L |
Colour | white |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 177554 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews