Kellys Gate X30 29 bike, sand
Bike fitting discount 20 % (you will save 28 €)
Kellys Gate X30 29 bike
Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding, from cycle paths, fields and forest roads to moderately demanding terrain. Usually fitted with components that are the golden middle when it comes to reliability and durability.
| Frame |
KELLYS Dynamic RRC 29", tapered HT, internal routing, 12x148 mm Boost thru axle
|
| Fork |
RockShox Recon Silver RL (29") Boost, 120 mm, Solo Air / Motion Control / OneLoc Remote Lockout / Maxle Lite 15 mm thru axle
|
| Shifting |
Shimano Deore SL-M6100-IR Rapidfire Plus (I-Spec EV)
|
| Derailleur |
Shimano Deore M6100 (direct mount)
|
| Cassette |
Shimano CS-M6100-12 (10-51T)
|
| Chain |
KMC X12
|
| Crankset |
Samox (34T) - length 170 mm (S), 175 mm (M - XL)
|
| Brakes |
Shimano Deore MT410 Hydraulic Disc
|
| Brake levers |
Shimano Deore BL-M4100
|
| Brake discs |
front 180 mm / rear 160 mm
|
| Rims |
KLS Asesino 25 Disc 622x25 (28 holes)
|
| Hubs |
Shimano Deore TC-500-MS-B Disc Center Lock (28 holes)
|
| Spokes |
stainless steel black
|
| Tires |
Schwalbe Rapid Rob 57-622 (29x2.25") K-Guard
|
| Seat post |
KS Rage-i Remote Telescopic - diam 30.9 mm / length 392 mm, 125 mm travel
|
| Saddle |
KLS Avenger II
|
| Stem |
KLS Advanced - diam 28.6 mm / bar bore 31.8 mm / 5° / length 60 mm
|
| Handlebars |
KLS Advanced FlatBar - diameter 31.8 mm / width 740 mm
|
| Grips |
KLS Advancer 2Density
|
| Headset |
FSA 1.5 integrated
|
| Bottom bracket |
Samox cartridge
|
| Pedals |
plastic
|
| Sex | Men, Unisex |
| Model year | 2025 |
| Gears | 1x12 |
| Groupset | Shimano Deore |
| Colour | sand |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 120 mm |
| Dropper post | yes |
| Control type | mechanical |
| product ID | 330555 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews