GT Zaskar Carbon Pro 29" mountain bike, model 2013
Frame- - Full carbon FOC Ultra™ Speed Blend, Triple Triangle™, tapered 1 1/8" - 1 1/2" head tube
Fork- - FOX RACING SHOX 32 FLOAT 29 CTD, travel 100 mm, damping adjustment, lockout from the handlebars, fixed axle 15x100 mm, conical column
Cranks - SHIMANO DEORE XT, 38/24 teeth
Central composition- - SHIMANO XT
Pedals- - N/A
Derailleur - SHIMANO DEORE XT
Derailleur - SHIMANO DEORE XT Shadow Plus
Shifting - SHIMANO XT, 2x10
Cassette- - SHIMANO DEORE XT, 10 speeds, 11-36 teeth
Chain- - KMC X10
Rims- - EASTON EA70 XCT 29" braided set
Tires- - MAXXIS ASPEN, 29"x2.1", 120TPI
Hubs- - EASTON EA70 XCT 29"
Spike- - EASTON EA70 XCT 29"
Brakes - FORMULA R1S, discs 180/160mm
Brake levers- - FORMULA R1S
Handlebars - CRANKBROTHERS COBALT 3, width 680mm
Stem- - EASTON EA70, slope 8°
Headstock - FSA NO.42 ACB, INTEGRATED, 1.5" LOWER, 1-1/8" UPPER
Seat- - FI ZI:K TUNDRA2, Mg
Seatpost- - CRANKBROTHERS COBALT 3
Color- - black-white-blue
Model year | 2013 |
Material | carbon fiber |
product ID | 5795 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews