GT Zaskar Carbon Expert 29 "mountain bike, model 2013
Frame - Full Carbon FOC Ultra ™ Speed Blend, Triple Triangle ™, Conical 1 1/8 "- 1 1/2" Head Tube
Fork- - RockShox REBA RL 29 SOLO AIR, stroke 100 mm, damping adjustment, handlebar lockout, fixed axle Maxl, conical column
Cranks- - SHIMANO SLX, 38/24 teeth
Middle composition - - SHIMANO SLX
Pedals- - N / A
Derailleur - SHIMANO SLX
Derailleur - SHIMANO DEORE XT Shadow Plus
Gear- - SHIMANO SLX, 2x10
Cassette- - SHIMANO DEORE, 10 speeds, 11-36 teeth
Chain- - KMC X10
Rims- - EASTON EXP360 29 ", 32 holes
Tires- - MAXXIS ASPEN, 29 "x2.1", 60TPI
Hubs- - GT ALL TERRA LIGHTWEIGHT, front fixed axle 15x100mm
Tip- - DT SWISS COMPETITION, 1.6 / 1.8mm
Brakes- - FORMULA RX, discs 180 / 160mm
Brake levers- - FORMULA RX
Handlebars - CRANKBROTHERS COBALT 2, width 680mm
Stem- - EASTON EA50, inclination 8 °
Head assembly - FSA NO.42 ACB, INTEGRATED, 1.5 "LOWER, 1-1 / 8" UPPER
Seat- - FI ZI: K TUNDRA2, Mg
Seatpost- - CRANKBROTHERS COBALT 2
Color- - black-white-green
Model year | 2013 |
Gears | 2x10 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | carbon fiber |
product ID | 5796 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews