Mongoose Argus Sport
Bike fitting discount 20 % (you will save 28 €)
FatBike 26 ", Tectonic T2, set Shimano SHIMANO Deore 1x10, brakes Tektro HD-M290.
Model year: 2021
Frame: Tectonic T2, aluminum, 26 "fat bike geometry, internal cable routing, 9 mm x 190 mm QR axle, replaceable hanger, tapered headtube
Fork: 26 ", aluminum steerer, 9 mm x 135 mm, QR axle
Cranks: Prowheel Charm, aluminum, 28T
Gear levers: Shimano SL-610, 10
Cassette: Sunrace, 10-speed, 11-46T
Chain: KMC X10-1 EPT
Shimano Deore RD-M6000
Rims: Mongoose, aluminum single wall, 95 mm ID, 32H, tubeless compatible
Hubs: Xposure, aluminum, ball bearing, 9 mm x 135 mm, 32H, 6-bolt rotorXposure, aluminum, ball bearing, 12 mm x 190mm, 32H, 6-bolt
Brakes: Tektro HD-M290, hydraulic, aluminum, 180 mm rotor
Stem: Xposure 3D forged aluminum, Threadless, 60 mm, 6 °, 35 mm clamp
Head composition: Threadless, ZS44 / ZS56, retainer bearing
Handlebars: Xposure double-butted, aluminum, 785 mm width, 15 mm rise, 35 mm clamp
Brake levers: Tektro HD-M290
Tip: 14 G, stainless steel
Tires : Xposure, 26 in x 4.8 in, folding bead
Saddle: Mongoose MTB, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mm
| Model year | 2021 |
| Gears | 1x10 |
| Groupset | Shimano Deore |
| Material | aluminium |
| Brakes | Hydraulic disc |
| product ID | 121830 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
sú k tomuto bicyklu pedále, resp. dajú sa používať na tento bike MTB tretry?
Dobrý deň,
podľa informácie od dodávateľa, sú pedále súčasťou balenia. Na bicykel môžete použiť aj SPD pedále a tretry.
Dobrý deň, nikde som nevedel dopátrať váhu bicykla. Viete mi ju prezradiť?
Dobrý deň,
výrobca váhu neuvádza, takže ju žiaľ nepoznáme.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

na sneh super
Translate by GoogleShow the original