Mongoose Argus Comp 2016 fat bike
Fat bike, which swims through any terrain thanks to its wide rubber.
Mongoose Argus is an available fatbike. The base of the wheels is an aluminum frame with a fixed fork and the wheel is fitted with hydraulic brakes. The bike is designed for riding in sand, snow and very muddy terrain. Wide wheels allow easy movement and control in this environment. The bike is for all enthusiasts who want to have fun on the bike and discover unusual routes and terrains.
Bicycle test: http://mtbs.cz/clanek/test-mongoose-argus/kategorie/testy-recenze/rubrika/bike-technika?page=3
Frame: Mongoose MTB aluminum fat tire frame. 190 mm thru axle rear spacing
Fork: Mongoose full alloy taper with 150 mm spacing
Cranks: FSA Comet with Mega Tooth 24 / 38T chainring
Middle composition: FSA Mega EXO
Gear levers: Shimano M618
Cassette: Shimano HG50 11-36T
Chain: KMC X10 with EPT anti-rust coating
Derailleur: Shimano Deore M610 direct mount
Shimano SLX RD-670
Rims: 100 mm wide with cutouts, 26 "
Hubs: Alloy disc 150 mm thru-axle 32H
Pedals: Alloy pedals with replaceable pins
Brakes: Tektro HD-290 hydraulic disc with 180 mm rotors
Stem: 3D forged 6061 with 35 mm clamp
Head composition: VP-J203PE
Handlebars: Double-butted 35 mm clamp 760 mm
Brake levers: Tektro HD-290 hydraulic disc
Wires: Stainless steel
Tires: Kenda Juggernaut 26 x 4.0 folding bead
Saddle: Mongoose MTB trail
Seatpost: Alloy 31.6 x 350 mm
Sizes: M: 175-185 cm, L: 185 - 195 cm
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano SLX, Shimano Deore |
Material | aluminium |
product ID | 12452 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews