Mondraker Foxy Carbon RR 29 bike, carbon/desert grey/orange
Mondraker Foxy Carbon RR 29 bike
Level and quality of equipmenthelp
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Specification
Frame |
Foxy 29 Stealth Air full Carbon, Zero Suspension System, 150 mm travel, Forward Geometry, aluminum CSC upper link with carbon bridge, Boost 12x148 mm rear axle, tapered head tube, 73 mm BSA bottom bracket, dedicated 1x drivetrain design, HHG internal cable routing, Enduro MAX sealed bearings, shock mudguard, ISCG 05, custom frame protectors. *Optional Geometry Kit. Optional MIND System (EU only)
|
Fork |
Öhlins RXF 36 M.2 29, 160 mm, TTX18 Twin Tube cartridge, tapered steerer tube, Boost 15x110 mm axle, offset 44 mm. Settings: high speed compression lever with climb mode, low-speed compression, rebound, air preload, ramp chamber. Fork settings: C20 R40
|
Shifting |
Sram Trigger GX Eagle, 12-speed, X-Actuation 1:1
|
Derailleur |
Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12, X-Actuation 1:1
|
Cassette |
Sram XG-1275, 10-52T, 12-speed
|
Chain |
Sram NX Eagle, 12-speed, Powerlock
|
Cranks |
Sram GX Eagle, Boost, DUB axle, Direct mount chain ring, S/M: 170 mm, L/XL: 175 mm
|
Brake levers |
Sram Code R, tool-free reach adjust
|
Rims |
e*thirteen LG1 Plus Enduro, IW30 Hookless, 6069 Welded Aluminum, 30 mm internal width, tubeless ready, 28 spokes
|
Front hub |
e*thirteen Boost 15x110 mm, triple-sealed, fully machined aluminum, IS 6 bolts
|
Rear hub |
e*thirteen Boost 12x148 mm, triple-sealed, fully machined aluminum w/6-degree engagement, IS 6 bolts, XD freehub
|
Spokes |
e*thirteen custom Hive triple-butted black steel, alloy nipples, nipple washers
|
Tires |
Maxxis Minion DHF 29x2.5 WT, TR, 3C MAXX TERRA compound, EXO+ protection, 120TPI, folding
|
Seatpost |
Onoff Pija dropper internal, Ø 31.6 mm, S: 405x95-125 mm, M: 458x120-150 mm, L-XL: 498x140-170 mm
|
Saddle |
SDG BEL-AIR 3.0, LPU foam, steel rails
|
Stem |
Onoff Sulfur FG 30 mm, 6061 forged alloy, Ø 31.8 mm barbore
|
Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise 20 mm, width 800 mm, 9º backsweep, 5º upsweep, Ø 31.8 mm barbore
|
Headset |
Acros custom for 1-1/2" head tube, angular contact bearings 40x52x7, Internal cable routing
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Product details
Sex | Men, Unisex |
Model year | 2023 |
Groupset | SRAM GX |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Fork travel | 160 mm |
Material | carbon fiber |
Colour | carbon/desert grey/orange |
Fork | Air |
Shock | Air |
Wheel material | Aluminum |
Rear travel | 150 mm |
product ID | 204618 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews