Mondraker F-Podium Carbon R 29 bike, carbon/british racing green/racing silver
Mondraker F-Podium Carbon R 29 bike
Level and quality of equipmenthelp
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Specification
Frame |
F-Podium 29 Stealth Air Full Carbon, XCO Optimized Zero Suspension System, 100 mm, XC Forward Geometry, Carbon Monoblock upper link, BSA bottom bracket, tapered head tube, HHG internal cable routing, dedicated 1X drivetrain design, Boost 12x148 mm rear axle , shock mudguard, postmount rear brake mount.
|
Fork |
Fox 34 Step Cast Float FIT4 EVOL Factory Kashima, 110 mm, tapered steerer tube, 15x110 mm Boost axle, offset 44 mm. Settings: remote 2pos Push-unlock, compression micro-adjustment at low-speed, rebound, air preload, Fox dual pull
|
Rear shock |
Fox Float DPS SV EVOL Factory Kashima, 185x47.5mm.
Settings: 2 position remote compression (open/lock), low-speed rebound, air preload. Trunnion top mount, 22.2x10mm bottom bushings |
Shifting |
Sram Trigger GX Eagle, 12-speed, X-Actuation 1:1
|
Rear derailleur |
Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12, X-Actuation 1:1
|
Cassette |
Sram XG-1275, 10-50T, 12-speed
|
Chain |
Sram GX Eagle, 12-speed, Powerlock
|
Cranks |
Sram X1 Carbon Eagle, Boost, DUB axle, Direct mount chain ring, S: 170 mm, M/L/XL: 175 mm
|
Brake levers |
Sram Level TL, Direct Link actuation, tooled reach adjust, lever pivot bushings
|
Rims |
Mavic Crossmax Carbon XL R 29, 30 mm internal width, hookless, tubeless ready, 24 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratchet system, IS 6 bolts, XD freehub
|
Spokes |
Mavic straight-pull double butted, contactless lacing
|
Tires |
Maxxis Rekon Race 29x2.35, EXO protection, TR, 120TPI, folding
|
Seatpost |
Onoff Helium Carbon 0-R, Ø 31.6 mm, 400 mm
|
Saddle |
Fizik Antares R7
|
Stem |
MDK, 6061 T6 Alloy, Ø 31.8 mm barbore, rise +/-5º, S/M: 50 mm, L: 60 mm, XL: 70 mm
|
Handlebars |
Onoff Helium Carbon 0.2, rise 4.8 mm, width 760mm, 9º backsweep, 0º upsweep, Ø 31.8 mm barbore
|
Headset |
Acros AZX-239 R1 Block Lock, ZS44/28.6 top, ZS56/40 bottom
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Product details
Sex | Men, Unisex |
Model year | 2023 |
Groupset | Sram X01, Sram X1, Sram GX |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Fork travel | 110 mm |
Material | carbon fiber |
Colour | carbon/british racing green/racing silver |
Fork | Air |
Shock | Air |
Wheel material | Carbon |
Rear travel | 100 mm |
product ID | 209762 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews