Marin Headlands 2 28 bike, blue/gray
Marin Headlands 2 28 bike
Level and quality of equipmenthelp
Suitable for enthusiasts who like to discover their neighborhood and more distant locations from the seat of their bicycle. The components have sufficient durability and can handle regular rides and training on light terrain, paved and unpaved roads.
Specification
Frame |
Unidirectional Carbon Beyond Road Platform, 1x Drivetrain Specific, 700c x 45mm/650B x 50mm Compatible, Flat Mount Disc, 142x12mm Thru-Axle, Internal Dropper Post Routing, Internal Housing Routing, Mudguard and Rear Carrier Mounting, Plentiful Gear MountsRouting, Mudguard and Rear Carrier Mounting, Plentiful Gear Mounts
|
Fork |
Marin Full Carbon w/ Tapered Steerer, 12 mm Thru-Axle, Flat-Mount Disc, Fender Eyelets
|
Shifting |
Shimano GRX RX600 1x11
|
Derailleur |
Shimano GRX RDX812 Shadow Plus w/ Clutch
|
Cassette |
Shimano CSM8000, 11-Speed, 11-42T
|
Chain |
KMC X11
|
Cranks |
Forged Alloy 1x11
|
Front brake |
Shimano GRX Hydraulic Disc, 160 mm/160mm Rotor
|
Rims |
Marin Aluminum Double Wall, 21 mm Inner, 21 mm Tall, Disc Specific, Tubeless Compatible
|
Front hub |
Forged Aluminum Alloy
|
Spokes |
14g Black Stainless Steel
|
Tires |
Vee Tire Co., G-Sport, 700x44C Tubeless Compatible
|
Seatpost |
Marin Alloy, 27.2 mm
|
Saddle |
Marin Beyond Road Concept
|
Stem |
Marine 3D Forged Alloy
|
Handlebars |
Marin Butted Alloy
|
Bar tape |
Marin Shock Absorbing Tape
|
Headset |
FSA Orbit IS
|
Bottom bracket |
External Sealed Cartridge Bearings
|
Product details
Sex | Men, Unisex |
Model year | 2024 |
Groupset | Shimano XT, Shimano GRX |
Gears | 1x11 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 28" |
Material | carbon fiber |
Size | 49, 52, 54, 56, 58, 60 |
Colour | blue/grey |
Fork | Rigid |
Wheel material | Aluminium |
product ID | 278007 |
MTB
Veľkosť | S | M | L | XL |
---|---|---|---|---|
Výška (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Veľkosť (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Výška (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
comment Reviews
There are currently no reviews