Lapierre Crosshill AL 3.0 28 bike, cool matcha green gloss
Lapierre Crosshill AL 3.0 28 bike
Suitable for enthusiasts who like to discover their neighborhood and more distant locations from the seat of their bicycle. The components have sufficient durability and can handle regular rides and training on light terrain, paved and unpaved roads.
| Frame |
aluminum, Non Boost 100/142 mm, disc brake Flat Mount
|
| Fork |
Lapierre CrossHill Alloy/Carbon, aluminum shaft 1 1/8"-1 1/2" tapered, 12x100 mm thru-axle
|
| Shifting |
Shimano Cues ST-U6030, shift/brake lever combination
|
| Derailleur |
Shimano Cues RD-U6000 10/11s, Shadow+, 11-speed
|
| Front derailleur |
Shimano Cues
|
| Cassette |
Shimano LG400, 11-45T
|
| Chain |
KMC eGlide
|
| Cranks |
Shimano Cues 2x11
|
| Brakes |
Shimano Cues BR-U6030, 2 pistons, resin pad, 160 mm
|
| Brake levers |
Shimano Cues ST-U6030 Shift-Brake-Lever
|
| Wheels |
Lapierre Gravel 25 mm Alloy 700C Shimano driver, Centerlock
|
| Tires |
Continental Terra Trail, 40-622
|
| Seat post |
XLC SP-R30, straight, 27.2 mm, aluminium
|
| Saddle |
XLC SA-S10
|
| Stem |
Alu, A-head, Bar bore: 31.8 mm
|
| Bar tape |
XLC BT-G40
|
| Headset |
FSA No.57 Tapered
|
| Bottom bracket |
Shimano Deore BB-MT501 68/73 mm, HOLLOWTECH II, BSA, BSA 73
|
| Pedals |
XLC PD-R01
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 2x11 |
| Groupset | Shimano Deore |
| Colour | cool matcha green glossy |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 700C (28") |
| Brakes | Hydraulic disc |
| Fork | Rigid |
| Control type | mechanical |
| product ID | 360102 |
| Bike size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | < 170 cm | 170 - 180 cm | 180 - 190 cm | > 190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews