Rock Machine Gravelride CRB 700, blue / orange / silver
Head composition: FSA Orbit IS 138 IS-2-138 ACB, 1-1 / 8 "
Fork: Gravel Specific Carbon, Fender & Carrier Ready, 1-1 / 8-1.5 ", Flat Mount, 100x12 Thru Axle
Sizes: 52cm (S), 54cm (M), 56cm (L), 58cm (XL)
Number of gears: 2x10
Gear levers: SHIMANO GRX ST-RX400, 2x10 speed
Front converter: SHIMANO GRX FD-RX400, DOWN SWING, DOWN-PULL
Rear derailleur: SHIMANO GRX RD-RX400 Shadow Plus
Cranks: SHIMANO GRX FC-RX600 46-30T
Cassette: SHIMANO DEORE CS-HG50-10, 11-36T
Middle composition: SHIMANO BB-R60, BSA, shell 68mm
Chain: KMC X10
Handlebars: ONE1 Compact, 400 / 420mm, 31.8mm
Stem: ONE1 Sport SL TDS-C302 Alloy, 31.8xE75 / 90mm, ± 10 °
Handles: Velo VL-T5079HD2R, anti-slip, reflective
Brakes: SHIMANO GRX BR-RX400, 160/140 rotor, hydraulic disc brake
Saddle: WTB SL8 Comp
Seatpost : ONE1 Race Carbon, SP 406, 27.2x350mm
Front hub: SHIMANO TIAGRA HB-RS470, 32H, CENTER LOCK, 12x100mm THRU Type AXLE
Rear hub: SHIMANO TIAGRA FH-RS470, 32H, CENTER LOCK, 12x142mm THRU Type AXLE
Rims: WTB ST i23, 32H
Tires: WTB Riddler TCS Light / Fast Rolling Tan Wall, 700x45C
Spikes : Sapim Leader, Stainless Black
Weight: 9.6kg (MY20 weight)
Weight limit: 115kg
Model year | 2022 |
Gears | 2x10 |
Groupset | Shimano Deore, Shimano GRX, Shimano Tiagra |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 144705 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
