Orbea TERRA M31e TEAM 1X 28 bicycle, dark green
Orbea TERRA M31e TEAM 1X 28 bike
Frame |
Orbea Terra carbon OMR Disc, monocoque construction, HS 1.5", PF30, powermeter compatible, Thru Axle 12 mm x 142 mm rear, thread M12x2 P1, Internal Cable Routing, EC/DC compatible
|
Fork |
Orbea Terra OMR carbon disc fork, full carbon steerer,
|
Shifting |
SRAM Rival eTap AXS
|
Rear derailleur |
SRAM Rival XPLR eTAP AXS
|
Cassette |
SRAM XG-1251 XPLR 10-44t 12-Speed
|
Chain |
SRAM Rival 12-Speed
|
Cranks |
SRAM Rival 1 Dub Wide 40t
|
Brakes |
SRAM Rival eTap AXS
|
Wheelset |
FULCRUM Rapid Red 900 DB
|
Front hub |
Orbea Thru Axle 12x100mm M12x2 P1 Solid
|
Rear hub |
Orbea Thru Axle 12x142mm M12x2 P1 Solid inner threaded
|
Rear tire |
Vittoria Terreno Dry CX-Gravel G2.0 TNT 700x38C
|
Seatpost |
OC Performance XP10 Carbon Seatpost, 27.2 mm, Setback 0
|
Saddle |
Prologo Akero AGX STN size 155 mm
|
Stem |
OC Road Performance RP10 Stem, -8°
|
Handlebars |
OC Gravel GR30, Reach 80, Drop 125 mm
|
Headset |
FSA 1-1/2" Integrated Aluminum Cup
|
Sex | Men, Unisex |
Groupset | SRAM Rival |
Model year | 2023 |
Gears | 1x12 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 28" |
Material | carbon fiber |
Size | XS |
Colour | dark green |
Fork | Rigid |
Wheel material | Aluminium |
product ID | 213711 |
Road
Size | 47 | 49 | 51 | 53 | 55 | 57 | 60 |
---|---|---|---|---|---|---|---|
Rider height (cm) | 155 - 160 | 160 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
Rider height (cm) | 155 - 166 | 167 - 172 | 173 - 179 | 180 - 185 | 186 - 191 | 192 - 207 |
Size | S | M | L | XL |
---|---|---|---|---|
Rider height (cm) | 155 - 170 | 165 - 180 | 179 - 190 | 185 - 198 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 150 - 160 | 160 - 170 | 170 - 180 | 180 - 190 | 190 - 200 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
There are currently no reviews