Mongoose Guide Comp 28 bike, black/pink
Mongoose Guide Comp 28 bike
Adventure begins where paved paths end. That's exactly how the Mongoose Guide could be characterized. The frame is made of aluminum alloy, which makes it light and at the same time very strong. Through gradual evolution, the Guide has evolved into a perfectly comfortable frame, whether you go to work every day or load it with bags and set off on a trip across the continent. The bike is fitted with Shimano parts, which pride themselves on shifting accuracy and longevity.On Guide, you can find braided wheels on WTB rims, which are suitable for converting to a tubeless system, thanks to which you will not have to deal with small defects. The bike also includes a frame bag, which has a special shape for this model. It does not disturb and thus complements the design of the bicycle. The bag is quite spacious, so you can put everything you need in it even for longer trips.
Thanks to the rich preparation , this gravel can hold really abundant bag options for a never -ending adventure.
Level and quality of equipmenthelp
Suitable for enthusiasts who like to discover their neighborhood and more distant locations from the seat of their bicycle. The components have sufficient durability and can handle regular rides and training on light terrain, paved and unpaved roads.
Specification
Frame |
Tectonic T2, aluminum, 700c adventure geometry, internal cable routing, 12 mm x 148 mm dropout, replaceable hanger, tapered headtube
|
Fork |
Mongoose, 700c, aluminum steerer, 12 mm x 100 mm, thru axle
|
Rear derailleur |
Shimano Tiagra RD-4601
|
Front derailleur |
Shimano FD-4700, band clamp
|
Cassette |
Sunrace, 10-speed, 11-32T
|
Chain |
KMC X10
|
Cranks |
Samox TAM31-232, aluminum, 46/30T
|
Brakes |
Shimano BR-S405 flat mount, hydraulic, aluminum, 160 mm rotor
|
Rims |
WTB ST-19, aluminum double wall, 19 mm ID, 32H, tubeless compatible,
|
Hubs |
Xposure, aluminum, ball bearing, 12 mm x 100 mm, 32H, 6-boltXposure, aluminum, ball bearing, 12 mm x 142 mm, 32H, 6-bolt
|
Spokes |
14G, stainless steel
|
Tires |
Kenda Small Block, 700 x 47c, wire bead
|
Seatpost |
Xposure, aluminum, 350 mm, zero offset, 31.6 mm
|
Saddle |
Mongoose adventure, steel rails
|
Stem |
Xposure diecast, threadless, 90 mm/100 mm, 7°, 31.8 mm clamp
|
Handlebars |
Xposure, aluminum, 450 mm - 510 mm width, 31.8 mm clamp
|
Headset |
Threadless, ZS44/ZS56, retainer bearing
|
Pedals |
Mongoose, nylon
|
Shift levers |
Shimano Tiagra ST-RS405, 2 x 10
|
Product details
Sex | Men, Unisex |
Model year | 2021 |
Groupset | Shimano Tiagra |
Gears | 2x10 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 28" |
Material | aluminium |
Size | S, M, L, XL |
Colour | black, pink |
Fork | Rigid |
Wheel material | Aluminum |
product ID | 121838 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews