Lapierre Crosshill CF 8.0 S 28 bicycle, translucent hex blue
Lapierre Crosshill CF 8.0 S 28 bicycle
Serious sports equipment, suitable for enthusiasts who like to diversify their daily dose of kilometers with a shortcut through forest and country roads, and are not afraid of a multi-day adventure. You can count on high durability and 100% reliability.
| Frame |
Carbon UD SL
|
| Fork |
RockShox Rudy Ultimate Race Day 2, Travel: 30 mm, 12 x 100 mm TA
|
| Shifting |
SRAM FORCE AXS D2
|
| Derailleur |
SRAM Force XPLR AXS 12s, 12-speed
|
| Cassette |
SRAM XG 1251 XPLR 12s, 10-44T
|
| Chain |
SRAM Force 12s
|
| Cranks |
SRAM Force Dub Wide Carbon 40T, 170 mm (XS, S), 172.5 mm (M, L), 175 mm (XL, XXL)
|
| Brakes |
SRAM Force, 160mm/160mm
|
| Brake levers |
SRAM Force ETAP AXS
|
| Wheelset |
DT Swiss GRC 1600 Spline, Front 12x100 mm, Rear 12x142 mm
|
| Tires |
WTB Raddler TCS LIGHT 700x44C black 60TPI
|
| Seat post |
RockShox Reverb AXS 27.2 mm, 75 mm
|
| Saddle |
FIZIK Terra Argo X7 150 mm
|
| Stem |
Lapierre alloy, internal routing, Ø: 31.8mm, 80mm (XS/S) 90mm (M) 100mm (L) 110mm (XL)
|
| Handlebars |
Lapierre Carbon gravel bar, Width: 420 mm (XS,S,M), 440 mm (L,X,XXL), Drop: 122 mm, Reach: 68 mm, Rise: 20 mm, Flare: 12°
|
| Bar tape |
LAPIERRE TAPE
|
| Headset |
ACROS ICR
|
| Bottom bracket |
SRAM Dub Pressfit 86.5 Road
|
| Pedals |
VP VPE-527
|
| Sex | Men, Unisex |
| Model year | 2025 |
| Gears | 1x12 |
| Groupset | SRAM Force |
| Size | XS, S, M, L, XL, XXL |
| Colour | translucent hex blue |
| Material | carbon fiber |
| Wheel material | Carbon |
| Wheel diameter | 700C (28") |
| Brakes | Hydraulic disc |
| Fork | Air |
| Control type | electronic |
| product ID | 308515 |
| Bike size | M | L | XL |
|---|---|---|---|
| Height (cm) | 165 - 178 cm | 178 - 188 cm | 188 - 195 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews