Giant Revolt Advanced 1 28 bike, phantom green
Giant Revolt Advanced 1 28 bike
Serious sports equipment, suitable for enthusiasts who like to diversify their daily dose of kilometers with a shortcut through forest and country roads, and are not afraid of a multi-day adventure. You can count on high durability and 100% reliability.
Frame |
Advanced-Grade Composite, 12x142 mm thru-axle, disc, flip chip dropout
|
Fork |
Advanced-Grade Composite, full-composite OverDrive steerer, 12 mm thru-axle, disc
|
Shifting |
SRAM Rival eTap AXS, 2x12
|
Derailleur |
SRAM Rival eTap AXS XPLR
|
Cassette |
SRAM Rival, 12-speed, 10x44
|
Chain |
SRAM Rival D1
|
Cranks |
SRAM Rival D1 OAK, 40T
|
Brakes |
SRAM Rival eTap AXS hydraulic, Giant MPH rotors [F] 160 mm, [R] 140 mm
|
Brake levers |
SRAM Rival eTap AXS hydraulic
|
Rims |
Giant P-X2 Disc wheelset
|
Hubs |
Giant P-X2 Disc wheelset
|
Spokes |
Giant P-X2 Disc wheelset
|
Tires |
Maxxis Rambler, 700x45c, tubeless
|
Seat post |
Giant Contact Switch, dropper, 30.9 mm 395 mm
|
Saddle |
Giant Approach
|
Stem |
Giant Contact, 8-degree
|
Handlebars |
Giant Contact XR D-Fuse, 31.8 mm
|
Bar tape |
Stratus Lite 3.0
|
Bottom bracket |
SRAM DUB, press fit
|
Extra |
Giant 1x chain guide, tubeless prepared, 53 mm max tire size in "long" flip chip position, 42 mm max tire size in "short" flip chip position
|
Model year | 2023 |
Gears | 2x12 |
Groupset | Other |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 173974 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
