Giant Revolt 1, 2020 model
Fork: carbon (including post)
Handlebars: Giant Contact XR D-Fuse, 31.8 mm, 5° bend to the rider, flare drop
Stem: Giant Contact, 8° slope
Seat post: Giant D-Fuse, alloy
Saddle: Giant Contact (Neutral)
Shifting: Shimano Tiagra, gears 2x10
Derailleur: Shimano Tiagra
Derailleur: Shimano Tiagra
Brakes: Giant Conduct, hydraulic caliper, expansion tank is part of the stem
Brake levers: Shimano Tiagra, mechanical
Cassette: Shimano HG500, 11-34 teeth
Chain: KMC X10
Cranks: FSA Omega Adventure, 48/32 tooth derailleurs
Middle composition: FSA MegaExo, press fit
Rims: Giant S-X2 Disc
Hubs: Giant S-X2 Disc, 12 mm solid axles
Spikes: Giant S-X2 Disc
Tires : Giant Crosscut AT 2, 700x38
| Model year | 2020 |
| Gears | 2x10 |
| Groupset | Shimano Tiagra |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 103421 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews