Fuji JARI 2.1, model 2021, copper
Fork: C10 carbon monocoque, tapered carbon steerer, 100x12mm thru-axle
Cranks: FSA Vero Pro, 46/30T
Central composition: Sealed cartridge bearing
Derailleur: Shimano Tiagra
Derailleur: Shimano Tiagra
Shifting: Shimano Tiagra STI, 2 x 10-speed
Cassette: Shimano HG500, 11-34T
Chain: KMC X10
Wheels: WTB ST i23 TCS rims, Formula hubs, 32H, 14G spokes, tubeless compatible
Tires: WTB Riddler, 37-622, 60tpi, folding
Brakes: Shimano Tiagra
Brake levers: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Headstock: Oval Concepts 325, 6061 alloy, 31.8mm clamp, 125mm drop, 25 degree flare, 4 degree sweep
Handlebars: Oval Concepts 313, 3D-forged 6061, +/-6 degrees
Stem: Oval Concepts 300, suede
Grips: Oval Concepts 238, steel rails
Saddle: Fuji, alloy, 27.2mm
Seat post: 10.73 kg
| Model year | 2021 |
| Gears | 2x10 |
| Groupset | Shimano Tiagra |
| Material | aluminium |
| Brakes | Mechanical disc |
| Control type | mechanical |
| product ID | 118849 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Naskladnenie je až po 31.9.2021? Nemá tam byť rok 2020?
Dobrý deň, termín je správny.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews