FELT BROAM 30, model 2019
fork: Felt Adventure Gravel UHC Advanced carbon fiber monocoque construction, ControlTaper 1.125" - 1.5" aluminum steerer tube, flat mount disc standard, 12 x 100mm thru axle with mid-mount rack and fender mounts
Head composition: FSA integrated sealed cartridge bearing with Felt VariableHeight Cone Spacers (20mm PC, 4.5mm aluminum), Felt top cap and aluminum bolt, No.42, 1.125 - 1.5"
Stem: Devox VariableAngle, ±8°/±16° rise, Ø31.8mm, 47cm: 80mm, 51cm: 90mm, 54 - 56cm: 100mm, 58cm: 110mm, 61cm: 120mm
Handlebars: Devox adventure bend, 86mm reach, 130mm drop, Ø31.8mm, 47 - 50cm: 420/450mm, 53 - 60cm: 440/470mm
wrapping : Devox Gelt tape with Felt Bubble-Tech F-Wing bar end plugs
Shifting: Shimano 105 ST-R7020, 11-speed
Front derailleur: Shimano 105 R7000 clamp-on, Ø31.8mm
Rear derailleur: Shimano 105 R7000 11-speed short cage
Cranks: FSA Omega Adventure Mega Exo, 46/30T, 47cm: 165mm, 51cm: 170mm, 54 - 56cm: 172.5mm, 58 - 61cm: 175mm
Center composition: FSA external cup, BSA threaded, 68mm
Chain: Shimano 11-speed
Cassette: Shimano 11-speed, 11-34T
Brakes: Shimano 105 ST-R7020, hydraulic, Shimano 105 BR-R7070 hydraulic disc, 160mm rotor, Shimano 105 BR-R7070 hydraulic disc, 140mm rotor
Saddle: SR Essenza Blackstar Gel
Seatpost : Devox Lite Road, Ø27.2mm x 330mm length
Seat clamp: Felt single bolt, Ø30.6mm
Rims: Devox Adventure 2.1 Disc, tubeless compatible 21mm inner width, 23mm depth
Front hub: Devox GR.2 Disc, sealed cartridge bearing, 12 x 100mm thru axle, Centerlock, 28H
Rear hub: Devox GR.1 Disc, 11-speed, 12 x 142mm thru axle, Centerlock, 28H
Axle: Front: Devox leverless 12 x 100 x 123L, thread: M12 x 1.5 x 15L; Rear: Devox leverless 12 x 142 x 166L Syntace style, thread: M12 x 1.0 x 15L
Tip 2.0mm stainless steel
Tires: Maxxis Refuse with Max Shield, tubeless ready, folding, 700 x 40c
Color: Chameleon Teal (Black)
Weight: 23.7 lb, 10.8 kg
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 88454 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews