Giro Giant Stance 29 2, model 2021
Bike fitting discount 20 % (you will save 28 €)
Frame: AluxX Aluminum, Flexpoint suspension, stroke 120 mm
Fork: Giant Crest 34 RCL, stroke 130 mm
Shock absorber: Suntour Raidon R, size 184.15 / 44.45, tuned for Giant
Handlebars: Giant Connect Trail, 31.8 mm
Stem: Giant Contact
Seatpost: Giant Connect, 30.9 mm
Saddle: Giant Romero
Pedals: -
Gearing: Shimano Deore, gears 1x12
Derailleur: -
Derailleur: Shimano Deore
Brakes: Shimano MT200
Brake levers: Shimano MT201
Cassette: Shimano Deore, 10-51 teeth
Chain: Shimano
Cranks: Praxis Cadet, 30-tooth converter
Middle composition: Shimano, press fit
Rims: Giant AM 29
Hubs: front: Giant Tracker Performance Boost, fixed axle 15x110 mm, encapsulated bearing / rear: Giant Tracker Sport, quick release 141 mm
Spikes : SAPIM
Tires : Maxxis Forekaster EXO TR, 29x2.35 (tubeless)
Accessories: preparation for tubeless operation
| Model year | 2021 |
| Gears | 1x12 |
| Groupset | Shimano Deore |
| Material | aluminium |
| Brakes | Hydraulic disc |
| Control type | mechanical |
| product ID | 113555 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Mohol by som sa spýtať že aký zdvih má zadný tlmič a či je to vzduchové, olejové alebo pružinové odpruženie
Dobry den prajem,
tlmic ma zdvih 44.45 mm (zdvih zadnej stavby je 120 mm) a jedna sa o vzduchovy model s olejovym tlmenim a nastavitelnym odskokom.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews