Giant Revolt 2 28 bike, ocean storm
Choose in-person pick-up at the store and decide on the spot.
Giant Revolt 2 28 bike
Suitable not only for commuting to work, but also for weekend trips outside the city. Ride on cycle paths, paved and gravel roads and during weekend activities. If you ride more frequently, expect to do the necessary fine-tuning more regularly.
| Frame |
ALUXX-Grade Aluminum, 12x142 mm thru-axle, disc, flip chip dropout
|
| Fork |
Advanced-Grade Composite, full-composite OverDrive steerer, 12 mm thru-axle, disc
|
| Shifting |
Shimano CUES U3030, 2x9
|
| Derailleur |
Shimano CUES U4020
|
| Front derailleur |
Shimano CUES U6030
|
| Cassette |
Shimano CS-LG300, 11-36T
|
| Chain |
KMC X11
|
| Cranks |
Shimano FC-U6030-2, 32/46T XS: 170 mm, S: 170 mm, M: 172.5 mm, M/L: 172.5 mm, L: 175 mm, XL: 175 mm
|
| Brakes |
Shimano BR-RS305 mechanical, Giant MPH rotors [F] 160 mm, [R] 160 mm
|
| Brake levers |
Shimano CUES U3030 hydraulic
|
| Rims |
Giant S-X2, alloy
|
| Hubs |
Giant alloy, 12 mm thru-axle
|
| Tires |
Giant CrossCut AT 2, 700x38C, tubeless
|
| Seat post |
Giant D-Fuse, alloy, 14 mm offset
|
| Saddle |
Giant Grit
|
| Stem |
Giant Contact, 8-degree XS: 50 mm, S: 60 mm, M: 70 mm, M/L: 80 mm, L: 80 mm, XL: 90 mm
|
| Handlebars |
Giant Contact XR Ergo-Control, 31.8 mm XS: 42 cm, S: 42 cm, M: 44 cm, M/L: 44 cm, L: 46 cm, XL: 46 cm
|
| Bar tape |
cork tape with gel
|
| Bottom bracket |
Shimano, threaded
|
| Accessories |
tubeless prepared, 53 mm max tire size in "long" flip chip position, 45 mm max tire size in "short" flip chip position
|
| Sex | Men, Unisex |
| Model year | 2026 |
| Gears | 2x9 |
| Groupset | Other |
| Colour | ocean tree |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 700C (28") |
| Brakes | Mechanical disc |
| Fork | Rigid |
| Control type | mechanical |
| product ID | 370485 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.


There are currently no reviews