Cannondale Dirt Dave 26 bike, gray
Cannondale Dirt Dave 26 bike
Cannondale presents a bike specially developed for dirt jump, street and pump track. A bike with a modern appearance, based on a strong and light frame made of the patented Smart Formed C3 Alloy, has a very lively geometry and a low center of gravity. The wheels are shod with great DTH tires from Maxxis in a width of 2.30". Shocks are dampened by a Circus Expert air suspension fork from the brand Manitou, which has 100 mm of travel, a 20 mm solid axle and the possibility of rebound regulation.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
26” wheels
This wheel size is used on sports models for older children, affordable bikes or city bikes. Their advantage is the lower weight and greater dexterity. There is lower availability of tyres for different terrain.
Mechanical disc brakes
Safer and more efficient braking even in wet and muddy conditions. Exerting more force on the lever for a higher braking effect. The cable may be subject to corrosion. Heavier weight.
Air fork
The best option in terms of weight and comfort. Provides more adjustment options (rebound, compression). Requires regular service - the service cycle is specified by the manufacturer.
| Frame |
C3 Alloy, Threaded BB, Disk Brake Mount, Integrated 1-1/8" -1.5" Tapered Headtube, 3/8" Dropout w/ Integrated Chain Tensioners
|
| Fork |
Manitou Circus Expert, Air w/ Rebound Adjust, 100mm, 20mm Thru Axle, 1-1/8" -1-1/2" Tapered Steerer, Preload Adjust, Black Stanchions
|
| Cassette |
Sunrace 13T
|
| Chain |
KMC HL1 Wide
|
| Brake levers |
Tektro 2 finger
|
| Rims |
Alloy, double wall, 32h
|
| Hubs |
(F) Formula 20x110 mm Boost thru-axle / (R) Sealed bearing cassette, 3/8x17 mm female bolt
|
| Tires |
Maxxis DTH 26 x 2.3"
|
| Seat post |
Cannondale 3, 6061 Alloy, 27.2 x 200 mm
|
| Saddle |
Fabric Magic Steel, steel rails
|
| Stem |
Cannondale 3, 6061 Alloy, 30 mm ° rise, 780 mm
|
| Grips |
Fabric Funguy
|
| Bottom bracket |
BMX Euro Type w/ Solid Spindle
|
| Pedals |
Low profile alloy with grippy: (R) Tektro mechanical disc, 160 mm rotor
|
| Door handles |
Tubular Cr-Mo 3pc., 170 mm Arms, Cold Forged CR-MO 22 mm x 8T Spline Spindle, 28T
|
| Spokes |
Stainless Steel, 14 g
|
| Model year | 2022 |
| Gears | 1x1 |
| Groupset | Other |
| Material | aluminium |
| Wheel diameter | 26" |
| Brakes | Mechanical disc brakes |
| Fork | Air |
| product ID | 138525 |
Mountain, city, cross-country
| Size | Rider height |
|---|---|
| XS | 147-160 cm |
| S | 157-170 cm |
| M | 165-177 cm |
| L | 175-187 cm |
| XL | 182-195 cm |
| XXL | 193-205 cm |
| Size | Rider height |
|---|---|
| 44 | 154-160 cm |
| 48 | 160-170 cm |
| 51 | 165-175 cm |
| 54 | 170-180 cm |
| 56 | 177-185 cm |
| 58 | 182-193 cm |
| 61 | 190-200 cm |
| Size | Rider height |
|---|---|
| Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -23% POC Joint VPD Air elbow protectors, uranium black
from 58.99 €
-23%
RRP 95.99 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews